Auto Setup Summary Exit Comms Drives Keyboard Power System Time/Date About System RAM: 12.00 MB Current Extended RAM: 11.00 MB Previous Extended RAM: 11.00 MB Power Management: High Diskette Drive A: 1.44 MB - 3.5" Diskette Drive B: Not Installed Hard Disk Drive 1: Auto Detect Hard Disk Drive 2: Not Installed Hard Disk Drive 3: Not Installed To open a window, press ALT+the highlighted character key; i.e., ALT+X to Exit |
Communications Settings Serial Port: 3F8h - 3FFh / IRQ4 [ ] Parallel Port: 378h - 37Fh / IRQ7 [ ] Parallel Port Mode: Unidirectional [ ] |
Disk Drive Settings Close Diskette Drive A: 1.44 MB - 3.5" [ ] Diskette Drive B: Not Installed [ ] Hard Disk Drive 1: Auto Detect [ ] Hard Disk Drive 2: Auto Detect [ ] Hard Disk Drive 3: Auto Detect [ ] IDE Hard Disk Interface: Internal Only [ ] Diskette Boot: Enable [ ] Press ALT+ to List Choices - TAB to get to Next Field |
Power Management Options Power Management: High [ ] Power Management under AC: Disable [ ] Slow CPU Speed when Idle: Enable [ ] BackLight: Full [ ] HighLight: Full [ ] Suspend Warning Tone: Enable [ ] Resume on Serial Port Ring: Disable [ ] Resume on Time of Day: Disable [ ] |
System Options Quick Boot: Disable [ ] Setup Lock: Disable [ ] CRT 640x480 Vert. Freq.: 60Hz Non-Interlaced [ ] CRT 800x600 Vert. Freq.: 56Hsz Non-interlaced [ ] CRT 1024x768 Vert. Freq.: 87Hz Interlaced [ ] |
Time and Date Settings Time: 13 : 25 : 06 Date: 06 / 05 / 2000 Enter New Value TAB to get to the Next Field |
|
Return to BIOS List
|
LTD 5/2/00