Wyse Wy-50

Key: Shift Setup
Note: Keyboards on some public area terminals have setup key disabled. On some public terminals the Setup key is unmarked. It will be the second from the right on the top row.
Note 2: On some older models setup must be accessed by jumping pins 2 and 3 on modem port.
Key sequence: Esc, Shift >, Shift Setup.
Handshake = Xon/XoffScreen = 80Cursor = block
blink? = onmode = fdxdata bits = 8
stop bit = 1parity bit = nonemodem port baud rate = 9600
blk end = crlf/etxauto NL = oncr = cr
autoscrl = onaux. baud rate = 9600scrl = jump
status = offs. saver = onprot. = dim
test = offkeys? = US/UKret/enter = cr/cr
compatible mode = TVI925enhance = on
Return to Terminal List

Settings listed are LTD default settings, not necessarily factory defaults. Certain settings may be changed at some terminals.
posted 4/9/97, last update 9/9/98 CD, UNM LTD