Settings for BIOS AMI A07
Page 1 of 2
Time: [11:27:10] Date: [Tue May 02, 2000]
Diskette Drive A: [3.5 inch, 1.44 MB]
Diskette Drive B: [not installed]
Use ZIP as A or B: [Off]
Drives:
Primary Type Cyls Hds Pre LZ Sec Size
Drive 0: [Auto EIDE Drive 10239]
Drive 1: [None]
Secondary
Drive 0: [Auto CD-ROM Device]
Drive 1: [Auto ATAPI Device]
Reserved Memory: None | Pentiumx III Processor-500MHz
CPU Speed: 500 MHz | Level 2 Cache: 512 KB Integrated
Num Lock: [On] | System Memory: 128 MB ECC SDRAM
Chassis Intrusion: [Enabled] | Video Memory: 8 MB SGRAM
DAC Snoop: [Off] | Service Tag: 7MU39
ACPI: [Off] |
----------------------------------------------------------------------------
Page 2 of 2
Keyboard Errors: [Report]
System Password: [Enabled]
Password Status: [Unlocked]
Boot Sequence: [Diskette First]
Setup Password: [Enabled]
Power Management: [Regular]
Wakeup On LAN: [Off]
------ Integrated Devices -------------
Sound: On
NIC: On
Mouse: On
Serial Port 1: Auto
Serial Port 2: Auto
Parallel Port: 378h
Parallel Mode: PS/2
IDE Hard Disk: Auto
Diskette: Auto
Speaker: On
CPU Serial #: Off
Entries in brackets may be altered by the user.
Entries in Bold type are usually changed from the default by LTD.
Chassis Intrusion will read Detected if cover has been
opened for service, and must be reset to Enabled.
System Password is determined by individual user or department.
Setup Password is set by LTD.
Boot Sequence on public machines is set to Hard Drive
Only.
Return to BIOS List
LTD 5/2/00