Roswell, NM ArcView (WWW) Demonstration
Installation Instructions


There are two ArcView (WWW) demonstrations available, one for ArcView1 and
one for ArcView2.  Each of these demonstrations is available in two formats: 
the self extracting .exe file and the compressed archive .zip file.

YOU MUST HAVE A COPY OF ArcView TO USE THIS DEMONSTRATION DATA ONCE IT 
HAS BEEN INSTALLED.  This is available from ESRI (www.esri.com).

The instructions below are generally written for ArcView2 users.  If you 
are using ArcView1, you should follow the parenthetical instructions 
labeled 'AV1'.


To extract and load this demonstration from the .exe file do the following:
        - From your root directory (c:\) create a new directory called 
          rosdem2 (AV1 use roswelld) using the following command: 
               mkdir rosdem2  (AV1 command is:  mkdir roswelld)
	- Go to this directory and place a copy
          of the rosdem2.exe (AV1 get roswelld.exe) file here.
	  Note: You may place it in another directory, however, ArcView
                will be searching for files in this directory and you 
                will have to redirect the pointers to the directory 
                containing the data (see instructions below)
        - Type the following command:
          rosdem2 -d  (AV1 command is:  roswelld -d)
	       Note: This will create sub-directory c:\roswelld\data 
                     (and c:\roswelld\views for AV1).
                     The ArcView data is in the data directory (and the views
                     are in the views directory for AV1).  Please see the 
                     file roswelld.wp (word perfect 6) for a complete 
                     description of the data, projects, and views.


To extract and load this demonstration from the .zip file do the following:
        - From your root directory (c:\) create a new directory called 
          rosdem2 (AV1 use roswelld) using the following command: 
               mkdir rosdem2  (AV1 command is:  mkdir roswelld)
	- Go to this directory and place a copy
          of the rosdem2.zip (AV1 get roswelld.zip) file here.
	  Note: You may place it in another directory, however, ArcView
                will be searching for files in this directory and you 
                will have to redirect the pointers to the directory 
                containing the data (see instructions below)
        - Type the following command:
          pkunzip -d  rosdem2  (AV1 command is: pkunzip  -d roswelld)
	       Note: This will create sub-directory c:\roswelld\data 
                     (and c:\roswelld\views for AV1).
                     The ArcView data is in the data directory (and the views
                     are in the views directory for AV1).  Please see the 
                     file roswelld.wp (word perfect 6) for a complete 
                     description of the data, projects, and views.




If you have placed these files in a different directory than the one 
listed in these instructions, you must reroute the pointers ArcView is 
using to locate the data files by directing ArcView to the proper location 
each time a view is accessed.  In ArcView2 you can reroute the pointers 
quickly by opening each .apr (project) file in a word processing program 
and performing a global find and replace command:
	find:           c:\rosdem2\data
	replace with:   <proper directory>
If this method is used, the modified .apr file must be saved in ASCII 
(DOS) Text format.





8/22/96
Larry Spear, DGR-UNM (lspear@unm.edu)

updated with ArcView2 information
12/18/96
Patrick S. Florence  (dgr0pf@unm.edu)