Publications

Last Updated November 5, 2011

201 publications: 6 Books and book chapters, 85 Journal Articles and 110 Articles in Refereed Conference Proceedings.

An "*" Indicating student co-authors

Special Publications

6. Guest-Editor: Reda Taha, M. M., ACI Special Publication on "ACI Special Publication on Frontiers in the Use of Polymers in Concrete", ACI SP-278, American Concrete Institute, April 2011.

5. Guest-Editor: Sobolev, K. and Reda Taha, M. M., ACI Special Publication on Nanotechnology for Concrete "The Next Big Thing is Small", ACI SP-267, American Concrete Institute, November 2009.

4. Guest-Editor: Reda Taha, M. M. and Al-Haik, M., Special Issue on Nanotechnology for Structural Materials. International Journal of Material and Structural Integrity, Vol. 3, Issues 2/3, 2009, pp. 99-260.

3. Guest-Editor: Reda Taha, M. M. and Mosallam, A., Special Issue on Structural Health Monitoring. International Journal of Smart Structures & Systems, Vol. 5, No. 4, 2009, 503 p.

2. Shrive, N. G. and Reda Taha, M. M. "Effect of Creep on New Masonry Structures", Chapter 4, Learning from Failure, Long-Term Behavior of Heavy Masonry Structures, Binda, L. Editor, WIT Press, South Hampton, UK, 2007, pp. 83-105.

1. Co- Editor: Proceedings of the International Conference on Performance of Construction Materials in The New Millennium, ICPCM, Cairo, Egypt 2003, El-Dieb, A. S., Reda Taha, M. M. and Lissel, S. L., Eds., Volumes 1 and 2, 2003, ISBN:977-237-192/193.

Articles in Refereed Scholary Journals

85. El-Dieb, A. S.,  Reda Taha, M.M. “Flow Characteristics and Acceptance Criteria for Fiber Reinforced Self-Compacted Concrete (FR-SCC)”, Construction and Building Materials, Vol. 12, pp: 585-896, 2012 .

84. Soliman*, E., Kandil, U. F., Reda Taha, M.M. “The Significance of Carbon Nanotubes on Styrene Butadiene Rubber (SBR) and SBR Modified Mortar”, Materials & Structures, In press, 2011 .

83. Adam, I., Reda Taha, M.M. “Identifying the Significance of Factors Affecting Creep of Concrete: A Probabilistic Analysis of RILEM Database”, International Journal of Concrete Structures and Materials,  In press, 2011 .

82. Soliman*, E., Kandil, U. F., Reda Taha, M.M. “Limiting Shear Creep of Epoxy Adhesive at the FRP-Concrete Interface Using Carbon Nanotubes”, International Journal of Adhesion and Adhesives,  In press, 2011 .

81. Soliman*, E., Al-Haik, M., Reda Taha, M.M. “On and off-axis tension behaviour of fiber reinforced polymer (FRP) composites incorporating multi-walled carbon nanotubes”, Journal of Composite Materials,  In press, 2011 .

80. Choi, -K., K.,  Reda Taha, M.M. “Rhological Modeling and Finite Element Simulation of Epoxy Adhesive Creep in FRP-Strengthened RC Beams”, Journal of Adhesion Science & Technology,  In press, 2011.

79. Kim, J.J., Fan*, T., Reda Taha, M.M. “Quantifying Deflection Variation in RC Beams Propagated from Microstructural Variability in Concrete Using Homogenization Technique”, ACI Special Publication for Andrew Scanlon Symposium, In press, 2011 .

78. Kim, J.J., Fan*, T., Reda Taha, M.M., Shrive, N. G.“The Effect of Damage and Creep Interaction on Behavior of Masonry Columns Considering Interface Debonding and Cracking”, Materials and Structures, In press, 2011 .

77. Azarbayejani, M., Jalalpour*, M., El-Osery, A. and  Reda Taha, M.M. “Field Application of Smart SHM Using Field Programmable Gate Array (FPGA) Technology to Monitor an RC Bridge in New Mexico”, Smart Materials & Structures  Vol. 20, No. 8, 16 p,2011. doi: 10.1088/0964-1726/20/8/085005

76. Adam, I., Reinhardt, A., Reda Taha, M.M., “Experimental Investigation on Creep and Shrinkage of Self-Consolidating Concrete”, Housing and Building Research Center (HBRC) Journal, Vol. 7, No. 2, 16 p, 2011.

75. Ross, T. J., Reda Taha, M.M., Kim, J. J, Gilfeather, F. “Logical Models for the Propagation of Disparate Information and Uncertainty Across Effectivity Trees”, Journal of Integrated Computer-Aided Engineering, Vol. 18, No. 3, pp: 251-264, 2011.

74. Kim, J.J., Fan*, T. and Reda Taha, M.M. “A Homogenization Approach for Uncertainty Quantification of Deflection in Reinforced Concrete Beams Considering Microstructural Variability”, Structural Engineering and Mechanics, An International Journal, Vol. 38, No. 4, pp: 503-516, 2011.

73. Al-Haik, M., Leseman, Z, Luhrs, C., Reda Taha, M.M. "Introducing Nanotechnology to Mechanical and Civil Engineering Students through Materials Science Courses”, Journal of Nano Education, Vol. 2, pp: 1-14, 2011.

72. Altunc, A. B., Kim, J. J., Al-Haik, M., Reda Taha, M.M. “Reliability-based Design of Blast Resistant Composite Laminates Using Carbon Nanotubes”, Composite Structures,Vol. 39, pp: 2042-2048, 2011.

71. Soliman*, E. M., Kandil, U. F. and Reda Taha, M.M. “A New Latex Modified Mortar Incorporating Carbon Nanotubes: Preliminary Investigations”, ACI Special Publication on Frontiers in the Use of Polymers in Concrete, ACI SP-278, 8 p. 2011.

70. Salas*, C., Mercer, D., DeCoster, T., Reda Taha, M.M. “Experimental and Probabilistic Analysis of Distal Femoral Periprosthetic Fracture - A Comparison of Locking Plate and Intramedullary Nail Fixation; Part A – Experimental Investigation”, Journal of Computer Methods in Biomechanics and Biomedical Engineering, Vol. 14, Issue 2, pp: 175-182, 2011.

69. Salas*, C., Mercer, D., DeCoster, T., Reda Taha, M.M. “Experimental and Probabilistic Analysis of Distal Femoral Periprosthetic Fracture - A Comparison of Locking Plate and Intramedullary Nail Fixation; Part B – Probabilistic Investigation”, Journal of Computer Methods in Biomechanics and Biomedical Engineering, Vol. 14, Issue 2, pp: 157-164, 2011.

68. Choi, K-K., Reda Taha, M.M., Masia, M.J., Shrive, P.L. and Shrive, N.G. “Numerical Investigation of Creep Effects on FRP-Strengthened RC Beams”, ASCE Journal of Composites for Construction, Vol. 14, No. 6, pp. 812-822, 2010.

67. Reda Taha, M.M., Masia, M.J., Choi, K-K., Shrive, P.L. and Shrive, N.G. “Creep Effects in Plain and FRP-Strengthened RC Beams”, ACI Structural Journal, Vol. 107, No. 6,pp. 627–635, 2010.

66. Kim, J.J., Reda Taha, M.M., and Ross, T. J. “Establishing Concrete Cracking Strength Interval using Possibility Theory with Application to Predict Possible RC Deflection Interval”, Engineering Structures, Vol. 32, pp. 3592-3600, 2010.

65. Reda Taha, M.M. “A Neural-Wavelet Technique for Damage Identification in the ASCE Benchmark Structure using Phase II Experimental Data”, Advances in Civil Engineering, Vol. 2010, No. 675927, 2010, 13 p., doi: .1155/2010/675927.

64. Rammohan, R.*, Farfan, B.G.*, Su, M.F., Reda Taha, M. M., and El-Kady, I. “Hybrid Genetic Optimization for Design of Photonic-Crystal Emitters”, Engineering Optimization, Vol. 42, No. 9, 2010, pp. 791–809.

63. Li, D. S., Baniassadi, M. Garmestani, H. Ahzi, S., Reda Taha, M. M. and Rush, D. “3D Microstructure Reconstruction of Carbon Nanotube Composites Using Correlation Function”, Journal of Computational and Theoretical Nanoscience, Vol. 7, No. 8, 2010, pp. 1462-1468.62.

62. Kim, J., Fan*, T., Reda Taha, M.M. “A Homogenization Model Examining the Significance of Nanoparticles on Concrete Strength and Stiffness” Journal of the Transportation Research Board (TRB), No. 2141, 2010, pp. 28-35.

61. Al-Haik, M., Luhrs, C., Reda Taha, M.M., Roy, A., Dai, L., Phillips, J. and Doorn, S. “Hybrid Carbon Fibers/Carbon Nanotubes Structures for Next Generation Polymeric Composites”, Journal of Nanotechnology, Vol. 2010, Article ID 860178, 2010, 9 pp., doi:10.1155/2010/860178

60. Al-Haik, M., Dai. J., Garcia, D.*, Chavez, J. *, Reda Taha, M. M., Luhrs, C. and Phillips, J. “Novel Growth of Multiscale Carbon Nanofilaments on Carbon and Glass Fibers" Nanoscience & Nanotechnology Letters, Vol. 1, No. 2, 2009, pp. 122-127.

59. Kim, J., Said, A., Reda Taha, M. M., “Significance of Cracking Uncertainty on Predicting Deflection of FRP-RC Beams ", ACI SP-264, Special Publication on Serviceability of Concrete Members Reinforced with Internal/External FRP Reinforcement, 2009, pp. 100-110.

58. Afifi, A., Medoro, A., Salas*, C., Reda Taha, M. M., Cheema, T., “A Novel Cadaver Model Investigating Irreducible Metacarpophalangeal Joint Dislocation”, Journal of Hand Surgery, Vol. 34, No. 8, 2009, pp. 1506-1511.

57. Luhrs, C., Garcia*, D., Tehrani*, M., Al-Haik, M., Reda Taha, M. M. and Philips, J., "Generation of Carbon nanofilaments on Carbon Fibers at 550 oC", Carbon, Vol. 47, No. 13, 2009, pp. 3071-3078.

56. Reinhardt*, A. L., Sheyka*, M. P., Garner*, A. P., Al-Haik, M. and Reda Taha, M. M. “Experimental and Numerical Nano-Characterization of Two Phases in Concrete”, International Journal of Material and Structural Integrity, Vol. 3, No. 2/3, 2009, pp. 134-146.

55. Reda Taha, M. M., Colak-Altunc, A. B. and Al-Haik, M. "A Multi-Objective Optimization Approach for Design of Blast Resistant Carbon Fiber-Epoxy Composite Laminates Using Carbon Nanotubes", Journal of Composite B: Engineering, Vol. 40, No. 6, 2009, pp. 522-529.

54. Sheyka*, M., El-Kady, I., Su, M. and Reda Taha, M. M. “Photonic sensors for micro-damage detection: A proof of concept using numerical simulation”, Journal of Smart Structures & System, Vol. 5, No, 4, 2009, pp. 483-494.

53. Kim*, J. J. and Reda Taha, M. M. “Robustness-to-uncertainty: An Alternative Perspective in Realizing Uncertainty in Modeling Deflection of Reinforced Concrete Structures”, ASCE Journal of Structural Engineering, Vol. 135, No. 8, 2009, pp. 998-1001.

52. Azarbayejani*, M., El-Osery, A. and Reda Taha, M. M. “Entropy-based optimal sensor networks for structural health monitoring of a cable-stayed bridge”,Journal of Smart Structures & System, Vol. 5, No, 4, 2009, pp. 369-380.

51. Harp*, D., Reda Taha, M. M.,, and Ross, T. “A Robust Genetic-Fuzzy Approach for Modeling Complex Systems with Two Civil Engineering Applications”, ASCE Journal of Computing in Civil Engineering, Vol. 23, No. 3, 2009, pp. 193-199.

50. Choi, K-K., Sherif, A. G., Reda Taha, M. M., Chung, L. “Shear strength of slender reinforced concrete beams without web reinforcement: A Model Using Fuzzy Set Theory”, Engineering Structures, Vol. 31, No. 3, 2009, pp. 768-777.

49. Reda Taha, M. M. , Neidigk*, S., and Noureldin, A. “Variable Stiffness Rheological Model for Interrelating Creep and Stress Relaxation in Ligaments”, International Journal of Experimental and Computational Biomechanics, Vol. 1, No. 1, 2009, pp. 96 - 113.

48. Meshgin*, P., Choi, K. K. and Reda Taha, M. M. "Experimental and Analytical Investigation of creep of epoxy adhesive at the concrete-FRP interfaces", International Journal of Adhesion and Adhesives, Vol. 29, No. 1, 2009, pp. 56 - 66.

47. El-Kady, I., Farfan*, B. G., Rammohan*, R. and Reda Taha, M. M. “Photonic Crystal High-Efficiency Multispectral Thermal Emitters”, Applied Physics Letters, Vol. 93, Issue. 15, 153501, 2008.

46. Sheyka*, M., El-Kady, I., Khraishi, T., and Reda Taha, M. M. "Micro Indentation of Photonic Crystals: Experimental and Analytical Investigations", International Journal of Mechanics and Materials in Design, Vol. 4, No. 4, 2008, pp. 407-418.

45. Azarbayejani*, Reda Taha, M. M. and Ross, T. J. “An Inductive Fuzzy Damage Classification Approach for Structural Health Monitoring”, International Journal of Material and Structural Integrity,Vol. 2, Issue 3, 2008, pp. 193-206.

44. Farfan*, B.G., Rammohan*, R., Su*, M. F., El-Kady, I. and Reda Taha, M. M. “Prediction of Photonic Crystals Emitter Efficiency Using An Optimized Fuzzy Learning Approach”, Photonic and Nanostructures - Fundamentals and Applications, Vol. 6, Issue 2, 2008, pp. 154-166.

43. Azarbayejani*, M., El-Osery, A. Choi, K. –K, Reda Taha, M. M., “Probabilistic approach for optimal sensor allocation in structural health monitoring”, Smart Materials and Structures, Vol. 17, No. 5, paper # 055019, 2008.

42. Reda Taha, M. M., El-Dieb A. S, Abd El-Wahab M. A., and Abdel-Hameed, M.E "Mechanical, Fracture and Microstructural Investigations of Rubber Concrete", ASCE Journal of Materials in Civil Engineering, Vol. 20, Issue 10, 2008, pp. 640-649.

41. Choi, K. K., Urgessa, G., Reda Taha, M. M. and Maji, A. K. "A Quasi-Balanced Failure Approach for Evaluating Moment-Carrying Capacity of FRP Under-Reinforced Concrete Beams", ASCE Journal of Composites for Construction, Vol. 12, Issue 3, 2008, pp. 236-245.

40. Su* , M. F., Reda Taha, M. M. , Christodoulou, C. and El-Kady, I. "Fuzzy Learning of Talbot Effect Guides Optimal Mask Design for Proximity Field Nanopatterning Lithography", IEEE Photonics Technology Letters, Vol. 20, Issue 10, 2008, pp. 761 - 763.

39. Su* , M.F., El-Kady, I. Reda Taha, M.M. and Christodoulou, C. "A Novel Integrated Tool Realizing Iteratively Optimized Modeling for Proximity Field Patterning Nanolithography", Photonic and Nanostructures - Fundamentals and Applications,Vol. 6, No. 1, 2008, pp. 69-80.

38. Choi, K. K., Lissel, S. L. and Reda Taha, M. M. , "Rheological Modelling of Masonry Creep", Canadian Journal of Civil Engineering, Volume 34, Number 11, 2007, pp. 1506-1517.

37. Harp*, D., Reda Taha, M. M., Stormont, J. C. and Farfan*, E., Coonrod J. "An Evaporation Estimation Model Using Optimized Fuzzy Learning From Example Algorithm with an Application to the Riparian Zone of the Middle Rio Grande in New Mexico, USA", Ecological Modeling,Vol. 208, Issue 2-4, 2007, pp: 119-128.

36. Altunok*, E. Reda Taha, M. M. , Ross, T. J."A Possibilistic Approach for Damage Detection in Structural Health Monitoring", ASCE Journal of Structural Engineering, Volume 133, Issue 9, pp. 1247-1256, 2007.

35. Choi, K-K. Reda Taha, M. M. , Sherif, A. "A Simplified Design Approach for Simply Supported Slab-Column Connections without Shear Reinforcement Based on Fuzzy Learning", ACI Structural Journal, Vol. 104, No. 4, pp: 438-447, 2007.

34. Reda Taha, M. M., Choi, K. K., Tait, M. and Lissel, S. L. "On Modeling Time Dependent Deformations of a Masonry Retaining Wall Post-Tensioned Using CFRP", ACI Special Publication, ACI SP-245, Case Histories and Use of FRP for Prestressing Applications, American Concrete Institute, MI, USA, , pp. 37-56, 2007.

33. Choi, K. K., Meshgin*, P. and Reda Taha, M. M. "Shear Creep of Epoxy at the Concrete-FRP Interfaces", Composites Part B: Engineering, Vol. 38, Issue 5-6, 2007, pp: 772-780.

32. Reda Taha, M.M. , El-Kady, I., Sheyka*, M. P., Su*, M. F., Khraishi, A., El-Osery, A. I. and Verley, J. C. "An integrated simulation environment realizing the ability of nano-photonic crystals to detect and quantify submicron and microdamage in materials " Journal of Computational and Theoretical Nanoscience, Vol. 4, 2007, pp. 494-503.

31. Choi, K-K. Reda Taha, M. M. , Park, H-G. and Maji, A.K. "Punching Shear Strength of Concrete Slab-Column Connections Reinforced with Steel Fibers", Cement and Concrete Composites, Vol. 29, 2007, pp. 409-420.

30. Sharaf , R., Reda Taha, M.M. , Tarbouchi, M. and Noureldin, A. "Merits and Limitations of Using Fuzzy Learning Systems for Temporal Integration of INS/GPS in Vehicular Navigation", Soft Computing, Vol. 11, No. 9, 2007, pp. 889-900.

29. El-Shafie, A., Reda Taha, M. M. and Noureldin, A. "A neuro-fuzzy model for inflow forecasting of the Nile River at Aswan High Dam", Water Resources Management,Vol. 21, No. 3, 2007, pp.533-556.

28. Noureldin, A., El-Shafie, A. and Reda Taha, M. M. "Optimizing Neuro-Fuzzy Modules for Data Fusion of Vehicular Navigation Systems Using Temporal Cross-Validation", Engineering Applications of Artificial Intelligence, Vol. 20, No.2, 2007, pp. 37-48.

27. Reda Taha, M. M. and Noureldin, A., Lucero, J. L. and Baca, T. J. "Wavelet Transform for Structural Health Monitoring: A Compendium of Uses and Features", Journal of Structural Health Monitoring, Vol. 5, No.3, 2006, pp. 267-295.

26. Reda Taha, M.M. and Shrive, N. G. "A Model of Damage and Creep Interaction in a Quasi-Brittle Composite Materials Under Axial Loading" Journal of Mechanics, Vol.22, No.4, 2006, pp. 339-347.

25. Altnuok*, E., Reda Taha, M.M., Epp, D.S., Mayes, R.L. and Baca, T. J. "Damage Pattern Recognition for Structural Health Monitoring Using Fuzzy Similarity Prescription", Journal of Computer Aided Civil and Infrastructure Engineering, Vol. 21, No.8, 2006, pp. 549-560.

24. El-Kady, I., Reda Taha, M.M. and Su*, M."Application of Photonic Crystals in Submicron Damage Detection and Quantification", Applied Physics Letters, Vol. 88, No.26, 253109, 2006. (Selected by Board of Editors to appear on Virtual Journal of Nanoscale Science & Technology, Volume 14, Issue 1, July 2006)

23. Reda Taha, M. M. and Lucero, J. "Enhancing Uncertainty Tolerance in Modelling Creep of Ligaments ", Biomedical Materials, Vol. 1, 2006, pp. 106-115.

22. Urgessa*, G., Horton*, S., Reda Taha, M.M. and Maji, A. "Significance of Stress-Block Parameters on the Moment Capacity of Sections Under-reinforced with FRP", ACI SP-230-87, Fibre Reinforced Concrete, November 2005, pp. 1531-1550.

21. Reda Taha, M. M. and Lucero, J."Damage Identification for Structural Health Monitoring using Fuzzy Pattern Recognition", Engineering Structures, Vol. 27, No. 12, 2005, pp. 1774-1783.

20 Ali, A., Reda Taha, M. M., Thornton, G. M., Shrive, N. G. and Frank, C. B. "Biomechanical Study Using Fuzzy Systems To Quantify Collagen Fibre Recruitment and Predict Creep of the Rabbit Medial Collateral Ligament" Transactions of the ASME, Journal of Biomechanical Engineering, Vol. 127, 2005, pp. 484-493.

19. Reda Taha, M. M., Noureldin, A., Osman A., and El-Sheimy, N. "Introduction to the Use of Wavelet Multi-Resolution Analysis For Intelligent Structural Health Monitoring", Canadian Journal of Civil Engineering, Vol. 31, No. 5, 2004, pp. 719-731.

18. Reda Taha, M. M., Noureldin, A., El-Sheimy, N. and Shrive, N. G. "Feedforward Neural Networks for Modelling Time-Dependent Creep Deformations in Masonry Structures", Proceedings of the Institution of Civil Engineers, Structures in Buildings, UK, Vol. 157, 2004, Issue SB4, pp: 279-292.

17. Reda Taha, M.M., Tromposch, E., Tadros, G., Mufti. A, Klowak, C. "Performance Based Design for FRP Strengthening of The Roof Panels of Calgary Saddledome", ACI Special Publication SP-215: Field Application of FRP Reinforcement: Case studies, 2003, Rizkalla, S. et al., Eds., pp. 385-398.

16. Reda Taha, M.M. "Self-Repair Epoxy Mortar for Strengthening and Rehabilitation applications using FRP", ACI SP-214-15, Polymer concrete: The first thirty years, Prusinski, R. C. and Fowler, D., Eds., American Concrete Institute, MI, USA, 2003, pp. 169-180.

15. Reda Taha, M.M., and Shrive, N. G." Ultra High Performance Concrete (UHPC) Anchors: A Step Towards Metal-Free Structures", Concrete International, Vol. 25, No. 8, 2003, pp 35-40.

14. Reda Taha, M.M., Noureldin, A., El-Sheimy, N. and Shrive, N. G. "Artificial Neural Networks to Predict Creep With an Example Application to Structural Masonry", Canadian Journal of Civil Engineering , Vol. 30, N0. 3, 2003, pp. 523-532.

13. Hassanain, M. A. and Reda Taha, M. M. "Design Optimization for HPC I-Girder Bridges Prestressed with CFRP Strandss", ICI-Journal of the Indian Concrete Institute, Special Edition on FRP, Vol. 3, No. 4, 2003, pp. 31-34.

12. Reda Taha, M.M., and Shrive, N. G. "New Anchors for Post-Tensioned Structures Using CFRP Tendons", ICI-Journal of the Indian Concrete Institute, Special Edition on FRP, Vol. 3, No. 4, 2003, pp. 27-30.

11. Reda Taha, M. M. and Shrive, N. G. "New Concrete Anchors for CFRP Post-Tensioning Tendon- Part I: State of the Art Review / Design", ACI Structural Journal, Vol. 100, No. 1, 2003, pp. 86-95.

10. Reda Taha, M.M. and Shrive, N. G. "New Concrete Anchors for CFRP Post-Tensioning Tendon- Part II: Experimental Investigation", ACI Structural Journal, Vol. 100, No. 1, 2003, pp. 96-104. 

9. Reda Taha, M. M. and Hassanain, M. A. "Estimating The Error in Deflections of Reinforced Concrete Slabs A Parametric Study Using the Theory of Error Propagation", ACI SP-210, Deflection Control for The Future, Gardner, J. Ed., American Concrete Institute, MI, USA, 2003, pp. 65-92.

8. Reda Taha, M.M., Xiao, S. , Yi, J., and Shrive, N. G. "Evaluation of Flexural Fracture Toughness for Quasi-Brittle Structural Materials Using a Simple Test Method", Canadian Journal of Civil Engineering, Vol. 29, No. 4, 2002, pp. 567-575.

7.  Reda Taha, M.M. and Shrive, N.G. "Enhancing Fracture Toughness of High Performance Carbon Fibre Cement Composites" ACI Materials Journal, Vol. 98, No. 2, 2001, pp. 168-16. 

6.   Reda Taha, M.M., El-Dieb, A. S., and Shrive, N.G. "Sorptivity: A Reliable Measurement for Surface Absorption of Masonry Units", Materials and Structures, Vol. 34, No. 241, 2001, pp. 438-445.

5.  Campbell, T. I., Shrive, N. G., Soudki, K. A., AL-Mayah, A., Keatley, J. P., and Reda, M.M. "Design and Evaluation of A Wedge-Type Anchor for FRP Tendons", Canadian Journal of Civil Engineering, Vol. 27, No. 5, 2000, pp.  985-992.

4.  Reda, M.M. and Shrive, N.G. "Enhancing Bond Strength Using Fly Ash", Masonry International, Journal of the British Masonry Society, Vol. 14, No. 1, 2000, pp. 9-17.

3.  Reda, M. M., Shrive, N.G. and Gillott, J.E. "Microstructural Investigations of Ultra High Performance Concrete", Cement and Concrete Research, Vol. 29, No.3, 1999, pp. 323-329 .

2.  Shaker, F.A., El-Dieb, A.S., and Reda, M.M. "Durability of Styrene-Butadiene Latex Modified Concrete", Cement and Concrete Research, Vol. 27, No. 5, 1997,  pp. 711-720.

1.  Okba, S.H., El-Dieb, A.S., and Reda, M.M. "Evaluation of the Corrosion Resistance of Latex Modified Concrete (LMC)" Cement and Concrete Research, Vol. 27, No. 6, 1997, pp. 861-868.

Articles in Refereed Conference Proceedings

110. Sheyka, M.*, Kim, J. J., Altunc, A. B., Reda Taha, M.M., “A Reliability-based Energy Approach for Design Optimization of Blast Resistant Composites”, Proceedings of the ASME International Mechanical Engineering Conference & Exposition, IMECE, Denver, USA, November 2011.

109. Azarbayejani, M., and Reda Taha, M.M.  “Application of fuzzy set theory in structural health monitoring to pattern different states of an RC bridge at Interstate 40”, Proceedings of 8th International Workshop on Structural Health Monitoring, Stanford, USA, Change, F-K,m Ed., September 2011.

108. Jalalpour*, M., El-Osery, A., Austin, E., Reda Taha, M.M. “Contact pressure and ultrasonic damage feature(s) in health monitoring of L-Shape bolted joints in aerospace structures”, Proceedings of 8th International Workshop on Structural Health Monitoring, Stanford, USA, Change, F-K,m Ed., September 2011.

107. Reda Taha, M.M. and El-Genk. M, “Investigating of Indigenous Ingredients for Nuclear Compliant Ultra High Performance Concrete (UHPC)”, Proceedings of 9th Symposium on High Performance Concrete, Rotorua, New Zealand, August 2011.

106. Kim, J. J,, Grahn*, R. andReda Taha, M.M. “Fracture Toughness Characteristics of Self-Consolidating Concrete Incorporating Fly Ash”, Proceedings of 9th Symposium on High Performance Concrete, Rotorua, New Zealand, August 2011

105. Azarbayejani, M., and Reda Taha, M.M. “Wavelet and Fast Fourier Transforms as Hierarchical Processing Tools to Monitor an RC Bridge at Interstate 40”, Proceedings of MFPT: The Applied Systems Health Management Conference 2011, May 2011, Virginia Beach, Virginia, USA, 2011.

104. Fan*, T., Kim, J. J., Reda Taha, M.M., and Shrive, N. G. “Examining Creep Buckling in Composite Masonry Columns”, Proceedings of 11th North American Masonry Conference, Minneapolis, USA, 2011.

103. Kim, J. J., Reda Taha, M.M., and Ross, T. J. “Non-Specificity Modeling of Concrete Cracking Strength Using Possibility Theory” Proceedings of 11th International Conference on Applications of Statistics and Probability in Soil and Structural Engineering (ICASP11) ETH Zurich, Switzerland, August 2011,

102. Soliman*, E., Kandil, U.F., Reda Taha, M.M., "Creep of Fiber Reinforced Polymer-Epoxy-Concrete Interface Incorporating Carbon Nanotubes”, Proceedings of the First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, SMAR 2011, Dubai, UAE, February 2011.

101. Jalalpour*, M., El-Osery, A., Rahman, M. K., Reda Taha, M.M., "Damage Tracking in Pipelines Using Smart Sensor Network”, Proceedings of the First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, SMAR 2011, Dubai, UAE, February 2011.

100. Farfan*, B.G , Azarbayejani, M., El-Osery, A., Reda Taha, M.M., "Sustainable structural health monitoring using field programmable gate array (FPGA) technology”, Proceedings of the First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, SMAR 2011, Dubai, UAE, February 2011.

99. Jalapour*, M., Reda Taha, M.M., Austin, E. “Correlating Shear Slip and Contact Pressure for Health Montiroing of Bolted Joints in Aerospace Structures”, CD Proceedings of the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, Philadelphia, Pennsylvania, USA, September 2010.

98. Jalapour*, El-Osery, A., Reda Taha, M.M. "Damage Tracking Using Smart Sensor Network”, CD Proceedings of the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, Philadelphia, Pennsylvania, USA, September 2010.

97. Kim, J. J., Reda Taha, M.M.,“Calibration of Partial Safety Factors for Masonry Panel Design Considering Creep and Damage” Proceedings of 8th International Masonry Society Conference, Dresden, Germany, pp. 989-996, June 2010.

96. Fan*, T., Kim, J. J., Reda Taha, M.M., Shrive, N. G. “Simulating Damage and Creep Interaction in Masonry Columns Considering Interface Debonding” Proceedings of 8th International Masonry Society Conference, Dresden, Germany, pp. 1791-1799, June 2010.

95. Gerstle, W., Lenke, L.R., Reda Taha, M.M., Magallanes, J.M., Martinez, R., Hays*, J.S. and Cabrera*, A.S. “Comparison of Direct Stiff Tension and Notched Beam Fracture Test Results”, Proceedings of 7th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-7), Jeju, South Korea, May 2010, In press.

94. Reinhardt*, A., Soliman*, E., Sheyka*, M., Al-Haik, M., Reda Taha, M.M.,“Fracture Toughness of Hydrated Cement Using Nanoindentation”, CD Proceedings of 7th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-7), Jeju, South Korea, May 2010.

93. Farfan*, B., Su, M. F., Reda Taha, M.M., El-Kady, I. F. “High-Efficiency Photonic Crystal Narrowband Thermal Emitters”, SPIE Photonic West Conference, San Francisco, CA. Jan. 2010.

92. Kim, J., Fan*, T. and Reda Taha, M.M. “Examining Uncertainty in Deflection of Reinforced Concrete Beams Using Concrete Homogenization Techniques”, Proceedings of International Conference on Computational Design in Engineering (CODE09), Seoul, South Korea, November 2009.

91. Kim, J., Reda Taha, M.M. “Non-Specificity of Deflection of Reinforced Concrete Beams using Cracking Strength Interval”, Proceedings of International Conference on Computational Design in Engineering (CODE09), Seoul, South Korea, November 2009.

90. Choi, K-K. and Reda Taha, M. M. “Predicting Shear Strength of Slender Reinforced Concrete Beams: A Model Based on Fuzzy Set Theory”, Proceedings of International Conference on Computational Design in Engineering (CODE09), Seoul, South Korea, November 2009.

89. Salas*, C., Neidigk*, S., Soliman*, E., Mercer, D. and Reda Taha, M.M., “Creep and Relaxation of Osteoporotic Bones”, CD Proceedings of Annual Conference of Society of Experimental Mechanics, Albuquerque, NM, June 2009.

88. Reinhardt*, A., Sheyka*, M., Tehrani*, M., Al-Haik, M. and Reda Taha, M.M., “Experimental and Numerical Investigation of Nano-Indentation of Self-Consolidating Concrete (SCC)”, CD Proceedings of Annual Conference of Society of Experimental Mechanics, Albuquerque, NM, June 2009.

87. Salas*, C., Mercer, D., DeCoster, T., and Reda Taha, M.M., “Examining Damage Accumulation in Osteoporotic Distal Femur Fracture Repair”, CD Proceedings of Annual Conference of Society of Experimental Mechanics, Albuquerque, NM, June 2009.

86. Azarbayejani*, M., Foley*, E., El-Osery, A. and Reda Taha, M.M., “Structural Health Monitoring of a Prototype Bridge”, CD Proceedings of Annual Conference of Society of Experimental Mechanics, Albuquerque, NM, June 2009.

85. Fan*, T., Kim, J. J., Reda Taha, M.M.,and Shrive, N. G., “A Three-Dimensional Finite Element Model Simulating Damage and Creep Interaction in Masonry”, CD Proceedings of 11th Canadian Masonry Symposium, Toronto, Canada, El-Dakhakhny et al. Eds., June 2009.

84. Kim, J. J. and Reda Taha, M.M., “Time-Dependent Reliability Analysis of Masonry Panels Under High Permanent Compressive Stresses”, CD Proceedings of 11th Canadian Masonry Symposium, Toronto, Canada,El-Dakhakhny et al. Eds., June 2009.

83. Reinhardt*, A. K., Tehrani*, M., Al-Haik, M. and Reda Taha, M.M., “Nano Scale Characterization of Self-Consolidating Concrete”, CD Proceedings International Conference on Self-Consolidating Concrete, Chicago, Illinois, November 2008, 10 p.

82. Reinhardt*, A. K., Adam, I., and Reda Taha, M.M., “Total and Basic Creep and Shrinkage of Self-Consolidating Concrete”, CD Proceedings International Conference on Self-Consolidating Concrete, Chicago, Illinois, November 2008, 10 p.

81. Reda Taha, M.M., Al-Haik, M., Adam. I., Tahrani*, M. and Reinhardt*, A., “Nano versus Macro Creep Compliance of Concrete”, Proceedings of Creep, Shrinkage and Durability Mechanics of Concrete and Concrete Structures, CONCREEP 8, Ise-Shima, Japan, October 2008, Tanabe et al. Eds., CRC Press, 2008, Vol. 1, pp. 229-235.

80. Adam, I., Lucero, J., Reda Taha, M.M. and Sakata. K., “Screening the Significance of Parameters Affecting Concrete Shrinkage”, Proceedings of Creep, Shrinkage and Durability Mechanics of Concrete and Concrete Structures, CONCREEP 8, Ise-Shima, Japan, October 2008,Tanabe et al. Eds., CRC Press, 2008, Vol. 2, pp. 1405-1411.

79. Kim*, J. J. and Reda Taha, M.M. “Integrating Creep and Damage in Modeling Historical Masonry: A Numerical Investigation”, Proceedings of 5th ASCE International Engineering and Construction Conference (IECC’5), Mosallam et al. Eds., August 2008, Irvine, CA, pp. 291-297, 2008. (Winner of Best Paper Award).

78. Azarbayejani*, M. and Reda Taha, M.M. “Optimal Sensor Placement on a Long Cable-Stayed Bridge”, Proceedings of 5th ASCE International Engineering and Construction Conference (IECC’5), Mosallam et al. Eds., August 2008, Irvine, CA, pp. 907-914, 2008.

77. Kim*, J. J. and Reda Taha, M.M. “Realizing the Possibility of Concrete Cracking”, Proceedings of 5th ASCE International Engineering and Construction Conference (IECC’5), Mosallam et al. Eds., August 2008, Irvine, CA, pp. 299-306, 2008.

76. Su*, M. F., El-Kady, I., Reda Taha, M.M., Bogart, K. H. A., Christodoulou, C. “Investigation of Dispersion Effects in Proximity Field Nanopatterning Lithography Using the Finite Difference Time Domain Method”, URSI General Assembly, Chicago, Illinois – August, 2008.

75. Schnalzer*, R. T., Su*, M. F., Leseman, Z., Reda Taha, M.M.and El-Kady, I. "Hot-Spot Damage Monitoring in Aerospace Composites Using Acoustic Bandgap (ABG) Sensors”, CD Proceedings ASCE Earth & Space 2008, Long Beach, CA, March 2008.

74. Ross, T. J. and Reda Taha, M.M. , "From the Pyramids to Using Artificial Intelligence: Evolution of Structural Design", Proceedings of the 12th International Colloquium on Structural and Geotechnical Engineering, Cairo, Egypt, December 2007.

73. Kim*, J. J. and Reda Taha, M.M. , "Robustness to Uncertainty in Modelling Deflection of Reinforced Concrete Structures",Proceedings of the 12th International Colloquium on Structural and Geotechnical Engineering, Cairo, Egypt, December 2007.

72. Azerbaijani*, M., Reda Taha, M.M. , Ross, T. J. "An Inductive Reasoning Approach for Fuzzy Damage Detection in Structures", Proceedings of the 12th International Colloquium on Structural and Geotechnical Engineering, Cairo, Egypt, December 2007.

71. Adam, I., Reinhardt*, A. and Reda Taha, M.M. "Creep and Shrinkage of Self-Compacting Concrete: Preliminary Results", Proceedings of the 12th International Colloquium on Structural and Geotechnical Engineering, Cairo, Egypt, December 2007.

70. Reda Taha, M.M. , Choi, K. K."Investigating the Effect of Concrete Characteristics on Bond Behavior of Latex Modified Concrete Overlays", CD Proceedings of 12th International Congress on Polymers in Concrete, September 2007.

69. Azarbayejani* , M., El-Osery, A., Choi, K-K, and Reda Taha, M.M., "Optimal Sensor Placement for Efficient Structural Health Monitoring", Proceedings of the 6th International Workshop on Structural Health Monitoring, Stanford, USA, Chang, F-K., Ed., September (2007), Vol.1, pp. 451-458.

68. Sheyka*, M. , Su*, M. F. , Reda Taha, M.M., El-Kady, I. "Sub-micron Damage Identification using Photonic Crystals: Innovative Simulation", Proceedings of the 6th International Workshop on Structural Health Monitoring, Stanford, USA, Chang, F-K., Ed., September (2007), Vol.1 , pp. 961-969

67. Reda Taha, M.M. , McCuskey*,M."An Efficient Damage Recognition Method Using Optimal Neural Wavelet Module", ASCE Conference on Computing in Civil Engineering, Pittsburg, July 2007.

66. Reda Taha, M.M. , McCuskey*, M., Bogus, S."A Robust Sustainability Metric Using Possibility Distributions", ASCE Conference on Computing in Civil Engineering, Pittsburg, July 2007.

65. Meshgin* , P., Choi, K. K., Reda Taha, M.M. and Maji, A. K. "Investigating Long-term Behavior of Epoxy at the Concrete-FRP Interfaces", 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, FRPRCS-8, Greece, July 2007.

64. Reda Taha, M.M. and Altunok*, E. "A Nouvelle Approach for Assessing the Possibility of Damage in Structures", Proceedings of the 10th Arab Structural Engineering Conference, Kuwait, November 2006.

63. Reda Taha, M.M. "New Sensors for Damage Detection Using Nano Photonic Bandgap Materials", Proceedings of the 10th Arab Structural Engineering Conference, Kuwait, November 2006.

62. McCuskey*, M., Reda Taha, M.M., Horton*, S., and Baca, T. J. "Identifying Damage in ASCE Benchmark Structure using a Neural-Wavelet Module", Proceedings of the International Workshop on Structural Health Monitoring, Granada, Spain, July 2006, pp. 421-428..

61. Schnalzer*, R. T., Reda Taha, M. M., McCuskey*, M.C, Quintana, S. C. and Camp, J." Identifying Bridge Performance Patterns in a Bridge Inventory Database: An Analytical Investigation", CD Proceedings of Joint International Conference on Computing and Decision Making in Civil and Building Engineering, Montreal, Canada, June 2006, 10 p.

60. Reda Taha, M. M., Choi, K. K. and Sherif, A. A. " Predicting The Punching Shear Strength of Interior Slab-Column Connections Using Fuzzy Systems", CD Proceedings of Joint International Conference on Computing and Decision Making in Civil and Building Engineering, Montreal, Canada, June 2006, 10 p.

59. Harp*, D.R., Reda Taha, M. M., Stormont, J. C., Farfan, E.*, and Coonrod, J. "Application of Fuzzy Modeling to Estimate Soil-Water Evaporation", Proceedings of Fourth International Conference on Unstaturated Soil, Carefree, Arizona, April 2006.

58. Verley, J. C., Mani, S.S., Fleming, J. G., El-Kady, I., Khraishi, T. and Reda Taha, M. M. "Experimental demonstration of using nanophotonic crystal sensor systems for submicron damage detection, quantification, and diagnoses", Proc. of SPIE Vol. 6179, 617904, (2006), Norbert Meyendorf, George Y. Baaklini, Bernd Michel, Eds, Advanced Sensor Technologies for Nondestructive Evaluation and Structural Health Monitoring II, San Diego, USA.

57. El-Kady, I., Su*, M. F., Reda Taha, M.M., Khraishi, T. and Verleyd, J.C. "Photonic crystal Sensor Systems for Sub-micron Damage Detection, Quantification, and Diagnoses", Proc. of SPIE Vol. 6172, 61720V, (2006), Vijay K. Varadan, Eds., Smart Structures and Materials 2006: Smart Electronics, MEMS, BioMEMS, and Nanotechnology , San Diego, USA.

56. Reda Taha, M.M., Sheyka*, M., Su*, M. F., El-Kady, I., Khraishi, T. and Verleyd, J.C. "An Integrated Numerical Approach for Microdamage Detection Using Nano Photonic Sensors", Proc. of SPIE Vol. 6179, 617907, (2006), Norbert Meyendorf, George Y. Baaklini, Bernd Michel, Eds., Advanced Sensor Technologies for Nondestructive Evaluation and Structural Health Monitoring II, San Diego, USA.

55. Harp*, D.R., Stormont, J. C., Reda Taha, M. M., Farfan, E.*, and Coonrod, J. "Estimation of Bare Soil Evaporation Using Fuzzy Modeling", CD Proceedings of ASCE Geo-Congress, Atlanta, USA, February 2006.

54. Lucero, J., Altnuok*, E., Reda Taha, M.M., Epp, D.S., and Baca, T. J. "Damage Assessment for Structural Health Monitoring Using Similarity Prescription and Fuzzy Pattern Recognition", Proceedings of the 24th International Modal Analysis Conference, Society of Experimental Mechanics, Paper #275, Jan. 2006, St. Louis, Missouri, USA.

53. Reda Taha, M.M. and Lucero, J. L."A Generic Fuzzy Metric for Damage Recognition in Structural Health Monitoring Systems", Proceedings of the IEEE Conference on Systems Man and Cybernetics, Waikoloa, Hawaii, October 2005, pp. 1518-1523.

52. Rammohan*, R. and Reda Taha, M.M. "Exploratory Investigations for Intelligent Damage Prognosis using Hidden Markov Models", Proceedings of the IEEE Conference on Systems Man and Cybernetics, Waikoloa, Hawaii, October 2005, pp. 1524-1529.

51. El-Kady, I. and Reda Taha, M.M. "Nano Photonic Sensors for Microdamage Detection: An Exploratory Simulation", Proceedings of the IEEE Conference on Systems Man and Cybernetics, Waikoloa, Hawaii, October 2005, pp. 1961-1966.

50. Horton*, S., Reda Taha, M.M. and Baca, T. J. "A Neural-Wavelet Damage Detection Module for Structural Health Monitoring", Proceedings of International Workshop on Structural Health Monitoring, Stanford, USA, September 2005, Chang, Fu-Kuo, Ed., pp. 556-564.

49. Reda Taha, M. M. , Abdel-Wahab, M. M. and El-Dieb, A.S. " Rubber Concrete: A New Addition to Polymer Concrete", CD Proceedings of Third International Conference on Construction Materials: (CONMAT 05), Vancouver, Canada, Banthia et al. Eds., August 2005

48. El-Shafie, A., Noureldin, A. and Reda Taha, M. M. "On Investigating Recurrent Neural Networks for Predicting Masonry Creep", CD Proceedings of Third International Conference on Construction Materials: (CONMAT 05), Vancouver, Canada, Banthia et al. Eds., August 2005

47. Reda Taha, M. M. and Sherif, A. "Predicting Shear Cracking of Prestressed Concrete Beams Using Fuzzy Learning from Examples", CD Proceedings of Third International Conference on Construction Materials: (CONMAT 05), Vancouver, Canada, Banthia et al. Eds., August 2005

46. Taheri, S., Reda Taha, M.M., Firoozbakhsh, K. and Moneim, M. "Interrelating Creep and Stress Relaxation of Medial Collateral Ligaments Using A Fuzzily Modeled Collagen Fibre Recruitment" Proceedings of the Twelfth International Conference on Computational Methods and Experimental Measurements, CMEM 2005, (Malta, June 2005), Transactions of the Wissex Institute of Technology, WIT press, UK, pp. 663-671.

45. Reda Taha, M. M., Lucero, J. and Ross, T.J. "Examining the Significance of Mortar and Brick Unit Properties on Masonry Bond Strength Using Bayesian Model Screening", Proceedings of the 10th Canadian Masonry Symposium, Shrive et al. Eds., Banff, Canada, June 2005, Vol.1 , pp. 112-122..

44. Lucero, J., Reda Taha, M. M. "A Wavelet-aided Fuzzy Damage Detection Algorithm for Structural Health Monitoring", CD Proceedings of the 23rd International Modal Analysis Conference, Jan. 2005, Orlando, Florida, USA.

43. Shrive, N.G., Reda Taha, M. M., and Masia, M. J. "Restoration and Strengthening with Fibre Reinforced Polymers: Issues to Consider", Proceedings of IV International seminar on Structural analysis of historical structures, Possibilities of Numerical and Experimental Techniques, Padova, Italy, November 2004, Modena et al. Eds., A. A. Balkema Publishers, Vol. 2, pp. 829-835, 2005.

42. El-Sheimy, N., Reda Taha, M. M. and X. Niu, "Next Generation Low-cost MEMS Based Sensors: Challenges for Implementation in SHM Systems ", Proceedings of the 2nd International Workshop on Structural Health Monitoring of Innovative Civil Structures, Mufti, A., and Ansari, F. Eds., Winnipeg, Manitoba, Canada, Sept. 2004, pp. 253-264.

41. Reda Taha, M. M., Noureldin, A., and Ross, T. "A Fuzzy-Aided Damage Recognition for Intelligent Structural Health Monitoring", Proceedings of the 2nd European Workshop on Structural Health Monitoring, Boller, C. and Staszewski, W. J., Eds., Munich, Germany, pp: 669-676, 2004.

40. Lissel, S. L. and Reda Taha, M. M., Tait, M. "Deflection prediction of Masonry retaining walls", Proceedings of the 7th Australian Masonry Conference, Newcastle, Australia, July 2004.

39. Shrive, N. G. and Reda Taha, M. M. "Flexural Bond Strength of Normal And Fly-Ash Modified Mortars", Proceedings of 7th Australian Masonry Conference, Newcastle, Australia, July 2004.

38. Reda Taha M. M., and Ali, A. "An Innovative Neuro-Fuzzy Model for Predicting Creep of The Medial Collateral Ligament", CD Proceedings of, ISSCI 2004, 5th International\Symposium on Soft Computing for Industry, WAC 2004, Seville, Spain, 6p.

37. Hassanain,M. A., Reda Taha, M. M., Noureldin, A. and El-Sheimy, N. "Automization of INS/GPS Integration System Using Genetic Optimization" CD Proceedings of ISSCI 2004 5th International Symposium on Soft Computing for Industry, WAC 2004, Seville, Spain, 6p.

36. Shrive, N. G. and Reda Taha, M. M., "Bond Strength of Clay Masonry Prisms Constructed wit Normal and Fly Ash Substituted Mortars", Proceedings of 13th International Brick and Block Masonry Conference (IBMaC), Amsterdam, The Netherlands, July 2004.

35. Reda Taha, M. M., Hassanain, M. A. and El-Sheimy, N."A systematic approach to the evaluation of errors in predicted deflections of reinforced concrete structures", Proceedings of Second International Conference on Structural Engineering, Mechanics and Computation, SEMC 2004, Cape Town, South Africa, 5-7 2004.

34. Reda Taha, M. M., Noureldin, A. and El-Sheimy, N."Establishing fuzzy confidence limits for structural health monitoring using wavelet analysis", Proceedings of Second International Conference on Structural Engineering, Mechanics and Computation, SEMC 2004, Cape Town, South Africa, 5-7 July2004.

33. El-Sheimy, N., Reda Taha, M.M., Osman, A., and Noureldin, A. "An Energy Approach for Intelligent Structural Health Monitoring Using Wavelet Analysis", IAG Symposia, Vol. 128, 2004, Springer Verlag, pp. 506-511.

32. Hegger, J., Sherif, A., Reda Taha, M. M. and Grötz, S. "A Nouvelle Approach for Predicting Shear Cracking Angle in RC Beams Using Artificial Neural Networks", CD Proceedings of Xth International Conference on Computing in Civil and Building Engineering, Weimar, Germany, 9 p., 2004

31. El-Gizawy, M., El-Sheimy, N., Reda Taha M. M., and Noureldin, A. "Neuro Fuzzy Systems for GPS/INS Integration", CD Proceedings of the European Navigation Conference, GNSS2004, 2004, Rotterdam, The Netherlands, Paper # 029, 9p.

30. Reda Taha, M. M. and Ali, A. "Modelling Ligament Fibre Recruitment Using Fuzzy Inference Systems", CD Proceedings of 6th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Madrid, Spain, Feb. 2004.

29. Reda Taha, M. M., Noureldin, A. and El-Sheimy, N. "mproving INS/GPS Positioning Accuracy During GPS Outages Using Fuzzy Logic", Proceedings of the 16th annual Technical Meeting of Satellite Devision, Institute of Navigation (ION) GPS-GNSS 2003, Portland, Oregon, 2003, pp. 499-508. (Winner of ION Best Paper award for Integrated Navigation Systems I).

28. Reda Taha, M.M., Noureldin, A. "Examining the use of Wavelet multi-resolution analysis in damage detection for structural health monitoring systems", Proceedings of The International Symposium on Integrated Life Cycle Design of Structures (ILCDES), Kuopio, Finland, 2003.

27. Reda Taha, M. M., Noureldin, A. and El-Sheimy, N."Application of Wavelet Multi Resolution Analysis For Intelligent Structural Health Monitoring Using Inertial Based Sensors", Proceedings of XXIII General Assembly of the International Union of Geodesy and Geophysics (IUGG2003), Sapporo, Japan, 2003,

26. Reda Taha, M. M. and Shrive, N. G. "Numerical Modelling of the Non-linear Creep Effects on The Stress Distribution in Composite Structures",  Proceedings of the 9th Arab Structural Engineering Conference (9ASEC), Abu Dhabi, United Arab Emirates, Nazmi, A. et al. Eds., Vol. 1, pp. 47-53, 2003.

25. Abdelazim, T., Reda Taha, M. M., Noureldin, A. and El-Sheimy, N. "Predicting Creep Using Radial Basis Function Neural Networks", Proceedings of the 9th Arab Structural Engineering Conference (9ASEC), Abu Dhabi, United Arab Emirates, Nazmi, A. et al. Eds., Vol. 2, pp. 1343-1350, 2003.

24. Osman, A., Noureldin, A., Reda Taha, M. M., El-Sheimy, N. and Shrive, N. G. "Application of Wavelet Multi Resolution Analysis For Intelligent Structural Health Monitoring Using Inertial Based Sensors", Proceedings of the 9th Arab Structural Engineering Conference (9ASEC), Abu Dhabi, United Arab Emirates, Nazmi, A. et al. Eds., Vol. 2, pp. 1369-1376, 2003.

23. Reda Taha, M. M. and Noureldin, A. "A Mamdani-Type Fuzzy Based System for Modelling Tension Stiffening in Concrete Structures", Proceedings of the 9th Arab Structural Engineering Conference (9ASEC), Abu Dhabi, United Arab Emirates, Nazmi, A. et al. Eds., Vol. 2, pp. 1335-1342. 2003.

22. Reda Taha, M.M., Hanley, J. W. and Langohr, P. "Design Considerations for Continuous, Post-Tensioned, High Performance Concrete, NU Bridge Girders", Proceedings, International Conference on Performance of Construction Materials (ICPCM), El-Dieb, A. S., Reda Taha, M. M. and Lissel. S. L., Eds., Cairo, Egypt, Feb. 2003, pp. 951-9603.

 

21. Noureldin, A. A., and Reda Taha, M.M., "Predicting Creep Performance of Masonry Structures Using Artificial Neural Networks (ANN)", Proceedings, International Conference on Performance of Construction Materials (ICPCM), El-Dieb, A. S., Reda Taha, M. M. and Lissel. S. L., Eds., Cairo, Egypt, Feb. 2003, pp. 1285-1294

20. Reda Taha, M.M., Wong, P., Tromposch, E., Tadros, G. and Wade, C. J., "Roof Strengthening of Calgary Saddledome: Design Alternatives Using Fibre Reinforced Polymers (FRP)", Proceedings, International Conference on Performance of Construction Materials (ICPCM), El-Dieb, A. S., Reda Taha, M. M. and Lissel. S. L., Eds., Cairo, Egypt, Feb. 2003, pp. 1175-1184

19. El-Sheimy, N., Kinawi, H. and Reda Taha, M.M. "Structural Monitoring Using “Wirelessly" Connected MEMS-based Sensors: Towards System Development", Proceedings, International Conference on Performance of Construction Materials (ICPCM), El-Dieb, A. S., Reda Taha, M. M. and Lissel. S. L., Eds., Cairo, Egypt, Feb. 2003, pp. 439-448

18. Reda Taha, M.M., El-Dieb, A., and Abd El-Wahab, M., "Fracture Toughness of Concrete Incorporating Rubber Tire Particles", Proceedings, International Conference on Performance of Construction Materials (ICPCM), El-Dieb, A. S., Reda Taha, M. M. and Lissel. S. L., Eds., Cairo, Egypt, Feb. 2003, pp. 129-138

17. Kinawi, H., Reda Taha, M.M. and El-Sheimy, N."Structural Health Monitoring Using the Semantic Wireless Web: A Novel Application For Wireless Networking", CD Proceedings, The 27th Annual IEEE Conference on Local Computer Networks (LCN), Hassanain, H. et al., Ed., Tampa, Florida, USA, 2002

16. Reda Taha, M.M., Kinawi, H. and El-Sheimy, N. "The Realization of Commercial Structural Health Monitoring Using Information Technology Based Techniques", CD Proceedings,  First International Workshop on Structural Health Monitoring of Innovative Civil Structures, Winnipeg, Manitoba, Canada, September 2002

15. Hassanain, M.A. and Reda Taha, M.M. "Design Economics of HPC Girder Bridges Prestressed with CFRP Tendons", Annual Conference of Canadian Society of Civil Engineers (CSCE), Montreal, Quebec, Canada, June 2002.

14.  Reda Taha, M.M., and Shrive, N. G. "Fatigue Assessment of Non-Metallic Anchors for Post-Tensioning CFRP Tendons" Proceedings,  International Conference of Composites in Construction, Porto, Figueiras et al. (Eds), Portugal, October 2001, pp. 345-350. .

13.   Reda Taha, M.M. and Shrive, N.G. "Concrete Anchors for Post-Tensioned CFRP Structures" Proceedings of the Second International Conference On Engineering Materials, San Jose, CA, USA, August 2001

12.  Reda Taha, M.M., and Shrive, N.G. "The Use of Pozzolans to Improve Bond and Bond Strength" Proceedings of the 9th Canadian Masonry Symposium, Fredericton, NB, Canada, May 2001. (Winner of H.W. H. Award)

11.  Reda Taha, M.M., El-Dieb, A. S., and Shrive, N.G. "Sorptivity: A Surface Absorption Criteria for Brick Units: A Proposal for the Canadian Masonry Standards", Proceedings of the 9th Canadian Masonry Symposium, Fredericton, NB, Canada, May 2001.

10.  Reda Taha, M.M., El-Dieb, A. S., and Shrive, N.G. "The Theory of Sorptivity: Application to Masonry Brick Units", Proceedings of the 9th (ICSGE) International Colloquium on Structural and Geo-technical Engineering, Cairo, Egypt, April 2001.

9.  Reda Taha, M.M. and Hassanain , M.A. "Effect of variation of concrete properties on the accuracy of estimated deflection of reinforced concrete slabs", CD Proceedings of the Annual Conference of Canadian Society of Civil Engineering (CSCE), Victoria, May 2001.

8.   Reda Taha, M.M. "Examining Bond Strength of Latex Modified Concrete", Proceedings of the 10th  International Congress on Polymers in Concrete (ICPIC), Honolulu, Hawaii, USA, May 2001, 12 p. 

7.  El-Dieb, A. S., and Reda Taha, M.M. "Corrosion of Reinforcing Steel in Relation to High Performance Concrete (HPC) Cover Thickness and Quality" Proceedings of the International Symposium on High Performance Concrete: Workability, Strength, and Durability, Hong Kong and Shenzhen University, China, Vol.2, 2000, pp. 195-200.

6.  Shrive, N.G., Reda, M.M., and Huizer, A. "Simple Design Procedures for Masonry Arches" Proceedings of the 12th International Brick/Block Masonry Conference, Madrid, Spain, Vol.3, 20000, pp. 1687- 1696. 

5.  Reda, M.M. and Shrive, N.G. "Is Cellular Mortar Suitable for The Canadian Environment?" Proceedings of the 12th International Brick/Block Masonry Conference, Madrid, Spain, Vol. 3, pp. 1697 –1706 , 2000.

4.  Reda, M. M., and Shrive, N.G. "A New Ultra High Performance Concrete Using Micro Carbon Fibers", Proceedings of the 12th CSCE annual Conference, Halifax, Canada, June 1998, pp. 329-338.

3.  Reda, M.M., Sayed-Ahmed, E.Y., and Shrive, N.G. "Towards a New Non-Metallic Anchorage System for Post-Tensioned Applications With Carbon Fibre Reinforced Plastic Tendons", Proceedings of the 42nd International SAMPE Symposium, Anaheim, USA, pp. 288-297, 1997.

2.  Reda, M.M., Sayed-Ahmed, E.Y., and Shrive, N.G."Advanced Composite Materials for Post-Tensioning Applications: Merits, Shortcomings and Possibilities", Proceedings of the First International Conference on Engineering Materials, Ottawa, Canada, Vol1, No. 21, 1997.

1.  Okba, S.H., Shaker, F.A., and Reda, M. M. "Latex Modified Concrete Using Locally Produced Latexes", Proceedings of the 7th (ICSGE) International Colloquium on Structural and Geo-technical Engineering, Cairo, Egypt, Vol. 2, pp. 461-470, 1997.

© Dr. Mahmoud Reda Taha, 2011.

 

 
 
\