SMART Laboratory
(Smart materials and MEMS for Applied Research
Technology)
Mechanical Engineering Department
Prof. Nathan Jackson
Publications:
Journal Papers:
1. N. Jackson, O. Olszewski, C. O’Murchu, A.
Mathewson, “Ultra-low Frequency PiezoMEMS Energy
Harvester using thin film Silicon and Parylene
Substrates,” Journal of Micro/Nanolithography, MEMS, and MOEMS, 17 (1),
015005 2018.
2. N.
Jackson, O. Olszewski, C. O’Murchu, A. Mathewson, “Shock-Induced Aluminum
Nitride based MEMS Energy Harvester to Power a Leadless Pacemaker,” Sensors and
Actuators A: Physical, 264, 212-218 2017.
3. O. Olszewski,
R. Houlihan, A. Blake, A. Mathewson, N. Jackson, “Evaluation
of vibrational PiezoMEMS harvester that scavenges
energy from magnetic field surrounding an AC current-carrying wire,” IEEE
Journal of Microelectromechanical Systems 2017.
4. N.
Jackson, and A. Mathewson, “Enhancing the Piezoelectric Properties of
Flexible Hybrid AlN materials using Semi-crystalline Parylene,” Smart Materials and Structures, 26 (4), 045005,
2017.
5. M. Khraiche, W. Phillips, N. Jackson, J. Muthuswamy, “Sustained Elevation of Activity of Developing
Neurons Grown on Polyimide Microelectrode Arrays (MEA) in Response to
Ultrasound Exposure,” Microsystem Technologies 1-13.
6. N.
Jackson, “Influence of Silicon Crystal Orientation on Textured
Piezoelectric Aluminium Nitride Deposited on Metal
Electrodes,” Vacuum 132, 47-52, 2016.
7. N.Jackson, J. Pedrosa, A. Bollero, A. Mathewson, O. Olszewski, “Integration of thick
permanent magnets for MEMS applications,” IEEE Journal of
Microelectromechanical Systems 25 (4), 716-724, 2016 .
8. N. Jackson, F. Stam, O. Olszewski,
H. Doyle, A. Quinn, A. Mathewson, “Widening the bandwidth of vibration energy
harvesters using a liquid-based non-uniform load distribution,” Sensors and
Actuators A: Physical, 246, 170-179, 2016.
9. N.
Jackson, F. Stam, J. O’Brien, L. Kailas, A. Mathewson, C. O’Murchu,
“Crystallinity and Mechanical effects from Annealing Parylene
Thin Films,” Thin Solid Films, 603, 371-376. 2016.
10. A. Rivadeneyra, J. Soto, R. O’Keeffe, N. Jackson,
A. Mathewson, J. Lopez-Vilanueva, “Tunable MEMS
Piezoelectric Energy Harvesting Device, Microsystems Technologies.1-8 2015.
11. N.
Jackson and F. Stam, “Optimization of Electrical Stimulation
Parameters for electro-responsive hydrogels for Biomedical Applications,”
Journal of Applied Polymer Science, 41687, 2015.
12. N.
Jackson, P. Verbrugghe, D. Cuypers,
K. Adesanya, L. Engel, P. Glazer, P. Dubruel, Y. Shacham-Diamand, E. Mendes, P. Herijigers,
F. Stam “A cardiovascular occlusion method based on the use of a smart
hydrogel,” IEEE transactions on Biomedical Engineering, 62 (2), 399-406, 2015.
13. N. Jackson, A. Sheehan, M. Hasan, F. Stam, K. Razeeb “Electro-Mechanical properties of carbon nanotubes
infused hydrogel,” Advances in Polymer Technology. 34 (2), 21484, 2015.
14. K. Grygoryev, G.
Herzog, N. Jackson, D. Arrigan, K.
McDermott, P. Galvin, “Reversible integration of
microfluidic devices with microelectrode arrays for neurobiological applications,”
Journal of BioNanoScience, 4 (3), 263-275, 2014.
15. P.
Cahill, N. Nuallain, N. Jackson, A.
Mathewson, R. Karoumi, V. Pakrashi,
“Energy Harvesting from Train Induced Response in Bridges,” ASCE Journal of
Bridge Engineering,” (2014) 04014034.
16. N. Jackson, R. O’Keeffe, F. Waldron, M. O’Neill,
and A. Mathewson “Evaluation of low-acceleration MEMS Piezoelectric Energy
Harvesting Devices,” Microsystem Technologies, 20 (4-5), 671-680, 2014.
17. N.
Jackson, L. Keeney, A. Mathewson, “Flexible-CMOS and
Biocompatible Piezoelectric AlN material for MEMS
Applications,” Smart Materials and Structures, 22 (2013) 115033-115041.
18. N.
Jackson, N. Cordero, F. Stam, “3-D Interdigitated electrodes for uniform
stimulation of electro-responsive hydrogels for biomedical applications,”
Journal of Polymer Science B: Polymer Physics, 2013.
19. P.
Cahill, N. Jackson, A. Mathewson, V. Pakrashi,
“PolyVinyliDene Fluoride (PVDF) Material based Energy
Harvesting from Train and Damaged Bridge Interaction,” Key Engineering
Materials, 569-570, 335-341, 2013.
20. E.
Chan, N. Jackson, A. Mathewson, P. Galvin, A. Dow, P. Kherani, C. Blaszykowski, M.
Thompson, “Surface modification of aluminum nitride with functionalizable
organosilane adlayers,”
Applied Surface Science, 282. 709-713, 2013.
21. N.
Jackson, R. O’Keeffe, F. Waldron, M. O’Neill, and A. Mathewson “Influence of Aluminum
Nitride Crystal Orientation on MEMS Energy Harvesting Device Performance,”
Journal of Micromechanics and Microengineering, 23 (7), 2013.
22. N.
Jackson, A. Sridharan, S. Anand, M. Baker, M. Okandan,
and J. Muthuswamy, “Long-term Neural Recordings using
MEMS based Movable Microelectrodes in the brain,” Frontiers in Neuroengineering 2010.
23. R. Saha, N. Jackson, C. Patel, and J. Muthuswamy, “Doped polycrystalline silicon thin films for
low noise interfaces with single neurons,” IEEE Transactions on Neural and
Rehabilitation Systems Engineering, 2010.
24. N.
Jackson, S. Anand, M. Okandan, and J. Muthuswamy, “Non-hermetic encapsulation materials for MEMS
based moveable microelectrodes for long-term implantation in the brain,”
Journal of Microelectromechanical Systems, 2009. 18 (6): 1234-1245.
25. N.
Jackson and J. Muthuswamy, “Flexible Chip
Scale Package and Interconnect for implantable MEMS Movable Microelectrode for
the Brain,” Journal of Microelectromechanical Systems, 2009. 18 (2): 396-404.
26. N.
Jackson and J. Muthuswamy, “Artificial dural sealant that allows multiple penetrations of
long-term implantable brain probes,” Journal of Neuroscience Methods, 2008.
171(1): 147-152.
27. J. Muthuswamy, M. Okandan, and N.
Jackson, “Single neuronal recordings using surface micromachined
polysilicon microelectrodes,”Journal
of Neuroscience Methods, 2005. 142(1): p. 45-54.
Conference Papers:
1. N. Jackson, O. Olszewski, A. Mathewson, C.
O’Murchu, “Ultra-low Frequency PiezoMEMS Energy
Harvester for a Leadless Pacemaker,” IEEE International Conference on
Micro Electro Mechanical Systems (MEMS) 2018 (pp. 642-645).
2. A.
Alejandre, O. Olszewski, N. Jackson, “Actuation Control of a PiezoMEMS biomimetic robotic jellyfish,” SPIE Microtechnologies, pp 1024617-10246172017.
3. N.
Jackson, C. O’Murchu, A. Mathewson, O. Olszewski, “Powering a
leadless pacemaker using a PiezoMEMS energy
harvester,” SPIE Microtechnologies, 102460V-102460V,
2017.
4. O.
Olszewski, A. Blake, M. O’Neill, R. MacLoughlin, A. Mathewson, N.Jackson, “A
silicon-based MEMS vibrating mesh nebulizer for inhaled drug delivery,” Eurosensors 2016.
5. N.
Jackson, F. Stam, O. Olszewski, R. Houlihan, A. Mathewson, “Broadening
the Bandwidth of Piezoelectric Energy Harvester using Liquid filled Mass,” Eurosensors 2015.
6. O.
Olszewski, N. Jackson, A. Blake, A. Mathewson, “Design and
Measurements of a MEMS Lamb Wave Resonator for GHz Applications, “26th
Micromechanics and Microsystems Europe Workshop, 2015.
7. R.
Houlihan, O. Olszewski, A, Sharma, N. Jackson, A. Blake, A.
Mathewson, “Analysis of thin film stress in energy harvester,” 26th Micromechanics
and Microsystems Europe Workshop, 2015.
8. N.Jackson, Z.
Olszewski, L, Keeney, A. Blake, A. Mathewson,, “A capacitive based
Piezoelectric AlN Film Quality Test Structure” 28th IEEE
Conference on Microelectronic Test Structures, 2015.
9. L.
Floyd, J. Pike, J. Tao, N. Jackson, “Observations on Substrate
Characterisation through Coplanar Trasmission
Line Impedance Measurements,” 28th IEEE Conference on
Microelectronic Test Structures, 2015
10. P.
Cahill, R. O’Keeffe, N.Jackson,
A. Mathewson, V. Pakrashi, “Structural Health
Monitoring of Reinforced Concrete Beam using Piezoelectric Energy Harvesting
System,” 7th European Workshop on Structural Health Monitoring
2014.
11. P.Cahill, N.
Jackson, A. Mathewson, V. Pakrashi, “The full
Potential of Energy Harvesting from Train Induced Responses in Bridges,” Civil
Engineering Research in Ireland Conference,
2014.
12. O.
Olszewski, R. Houlihan, R. O’Keeffe, M. O’Neill, F. Waldron, A.
Mathewson, N. Jackson, “A MEMS silicon-based piezoelectric AC
current Sensor,” Eurosensors 2014.
13. R.
O’Keeffe, N. Jackson, K. McCarthy, A. Mathewson, “Test Set-Up
for Analysis of Fluid Based Energy Harvesting,” IEEE International Conference
on Microelectronic Test Structures (ICMTS), 2014 (Submitted).
14. P.
Cahill, A. Mathewson, N. Jackson, N. Nuallain,
R. Karoumi, V. Pakrashi,
“Comparison of Piezoelectric Materials for Energy Harvesting from Civil
Infrastructural Elements for use in Health Monitoring,” 4th International
Symposium on Life-Cycle Civil Engineering, Tokyo, Japan, 2014.
15. S. Damle, M. Khraiche, P. Nguyen, S.
Reiss, N. Jackson, G. Silva, G. Cauwenberghs,
“Optimization of Surface Roughness of Flexible Neural Implants,” in 35th annual
International Conference of the IEEE Engineering in Medicine and Biology
Society. 2013. Osaka, Japan.
16. N. Jackson, L.
Keeney, A. Mathewson, “Flexible Aluminium
Nitride/Polyimide Piezoelectric material for MEMS applications,” the 10th International
Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA) and 8th Annual
Energy Harvesting Workshop (EHW), Hannover, Germany, 2013.
17. N.
Jackson, R. O’Keeffe, M. O’Neill, F. Waldron, A. Mathewson, “CMOS
compatible Low-Frequency Aluminium Nitride MEMS
Piezoelectric Energy Harvesting Device,” SPIE Microtechnolgies,
Grenoble, France, 2013.
18. M. Magno, N. Jackson, A. Mathewson, L. Benini, E. Popovici, “Combination
of hybrid energy harvesters MEMS piezoelectric and nanowatt radio wake up to
extend lifetime of system for wireless sensor nodes,” 3rd Workshop
on Ultra-Low Power Sensors Networks, Prague, Czech Repulbic,
2013.
19. R.
O’Keeffe, N. Jackson, M. O’Neill, K. McCarthy, A. Mathewson,
“Investigation into Modelling Power Output for MEMS Energy Harvesting Devices using
COMSOL Multiphysics,” IEEE conference on thermal, mechanical, and multi-physics
simulation and experiments with MEMS, Wroclaw, Poland, 2013.
20. R.
O’Keeffe, N. Jackson, K. McCarthy, A. Mathewson, “Investigation of
Devices for In-Vivo Energy Harvesting through Blood Flow Excitation,” in 26th Anniversary
IEEE International Conference on Microelectronic Test Structures (ICMTS) March
2013, Osaka, Japan.
21. P.
Cahill, N. Jackson, A. Mathewson, V. Pakrashi,
“PolyVinyliDene Fluoride (PVDF) Material based Energy
Harvesting from Train and Damaged Bridge Interaction,” 10th International
Conference on Damage Assessment of Structures, Dublin, Ireland, 2013.
22. P.
Cahill, N. Jackson, A. Mathewson, V. Pakrashi,
“Experimental Studies on PolyVinyliDene Fluoride
(PVDF) Sensor for Energy Harvesting,” submitted to 11th International
Conference on Structural Safety and Reliability, New York, USA, July 2013.
23. P.
Cahill, N. Jackson, A. Mathewson, V. Pakrashi,
“Experimental Optimization of a PolyVinyliDene
Fluoride (PVDF) Sensor for Energy Harvesting from Cyclic Loading,” Association
for Structural and Multidisciplinary optimization in the UK (ASMO-UK), 2012,
Cork, Ireland.
24. P.
Cahill, N. Jackson, A. Mathewson, V. Pakrashi,
“Characterisation of
a PolyVinyliDene Fluoride (PVDF) Material for Energy
Harvesting from Road Infrastructure,” Bridge and Infrastructure Research in
Ireland, September 2012, Dublin, Ireland.
25. A. Rivadeneyra, R. O’Keeffe, N. Jackson, J. Lopez,
A. Mathewson, “Frequency response of variants of a cantilever beam,”
International Conference on Synthesis, Modeling, Analysis and Simulation Methods
and Application to Circuit Design, Seville, Spain 2012.
27. N. Cordero, I. Sokolov, N.
Jackson, S. Krylov, “Multiphysics Modelling of Electroactive
Hydrogels (EAH)”, accepted for presentation at EuroSimE
2012, 13th International Conference on Thermal, Mechanical and Multi-Physics
Simulation and Experiments in Microelectronics and Microsystems, which will
take place in Lisbon on April 14-17, 2012.
28. N.
Jackson, R. O’Keeffe, R. O’Leary, M. O’Neill, F. Waldron, A. Mathewson,
“A diaphragm based piezoelectric AlN film quality
test structure,” in 25th Anniversary IEEE International
Conference on Microelectronic Test Structures March 2012, San Diego, CA, USA.
29. N.
Jackson, P. Verbrugghe, A. Embrechts,
P. Herigers, E. Mendes, F. Stam, “Reliability testing
of implantable polyacrylamide electroactive hydrogels,” in 9th annual
IASTED International Conference on Biomedical Engineering February 2012.
Innsbruck, Austria.
30. N.
Jackson, R. O’Keeffe, R. O’Leary, M. O’Neill, A. Mathewson, “Wireless
Accelerometers for Early Detection of Restenosis,” in 25th Annual
Eurosensors Conference September 2011. Athens, Greece
31. M. Khraiche, N. Jackson, J. Muthuswamy,
“Early onset of Electrical Activity in Developing Neurons Culutred
on Carbon Nanotube Immobilized Microelectrodes,” in 31st Annual
International Conference of the IEEE Engineering in Medicine and Biology
Society. 2009. Minneapolis, Minnesota.
32. N.
Jackson and J. Muthuswamy, “Flexible
Interconnect and Packaging for MEMS Moveable Neural Microelectrodes,” in 41st annual
International Microelectronics and Packaging Society Symposium. 2008.
Providence.
33. M. Khraiche, B. Phillips, N. Jackson, J. Muthuswamy “Ultrasound Induced Increase in Excitability of
Single Neurons,” in 30th annual International Conference of the
IEEE Engineering in Medicine and Biology Society. 2008. Vancouver, British
Columbia, Canada.
34. N.
Jackson, P. Stice, M. Okandan,
J. Muthuswamy, “Long-term cortical recordings with microactuated microelectrodes,” in 3rd annual
international IEEE EMBS Conference on Neural Engineering. 2007. Kohala Coast,
HI.
35. J. Muthuswamy, M. Okandan, A. Gilletti, M. Baker, T. Jain, N. Jackson,
“Movable Microprobes for the Brain,” 3rd annual International
IEEE EMBS conference on Microtechnologies in Medicine
and Biology, 2005. Kahuku, Oshu,
HI.